Section Width125 mm (4.9")
Aspect Ratio228%
Rim Diameter52"
Overall Diameter1891 mm (74.4")
Sidewall Height285 mm
Circumference5940 mm
125/228R52 — Buy Tires

Everything to know about the 125/228R52 tire size

Size geometry

A 125/228R52 tire has a 125mm section width and a 228% aspect ratio, mounted on a 52-inch rim. Sidewall height works out to 285.0mm (11.22") and overall outside diameter is 1890.8mm (74.44"). At highway speed the tire completes about 168 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 125/228R52 is unavailable, the closest same-diameter substitutes on the same rim are 115/248R52 and 135/211R52. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 125/228R52 you can upsize to 135/202R53 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 115/259R51 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 125/228R52 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 125/228R52

tire_size.no_vehicles_found