Section Width125 mm (4.9")
Aspect Ratio244%
Rim Diameter48"
Overall Diameter1829 mm (72.0")
Sidewall Height305 mm
Circumference5747 mm
125/244R48 — Buy Tires

Everything to know about the 125/244R48 tire size

Size geometry

A 125/244R48 tire has a 125mm section width and a 244% aspect ratio, mounted on a 48-inch rim. Sidewall height works out to 305.0mm (12.01") and overall outside diameter is 1829.2mm (72.02"). At highway speed the tire completes about 174 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 125/244R48 is unavailable, the closest same-diameter substitutes on the same rim are 115/265R48 and 135/226R48. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 125/244R48 you can upsize to 135/217R49 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 115/276R47 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 125/244R48 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 125/244R48

tire_size.no_vehicles_found