Section Width125 mm (4.9")
Aspect Ratio30%
Rim Diameter28"
Overall Diameter786 mm (30.9")
Sidewall Height38 mm
Circumference2470 mm
125/30R28 — Buy Tires

Everything to know about the 125/30R28 tire size

Size geometry

A 125/30R28 tire has a 125mm section width and a 30% aspect ratio, mounted on a 28-inch rim. Sidewall height works out to 37.5mm (1.48") and overall outside diameter is 786.2mm (30.95"). At highway speed the tire completes about 405 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 125/30R28 is unavailable, the closest same-diameter substitutes on the same rim are 115/33R28 and 135/28R28. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 125/30R28 you can upsize to 135/18R29 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 115/44R27 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 125/30R28 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 125/30R28

tire_size.no_vehicles_found