Section Width125 mm (4.9")
Aspect Ratio31%
Rim Diameter20"
Overall Diameter586 mm (23.1")
Sidewall Height39 mm
Circumference1839 mm
125/31R20 — Buy Tires

Everything to know about the 125/31R20 tire size

Size geometry

A 125/31R20 tire has a 125mm section width and a 31% aspect ratio, mounted on a 20-inch rim. Sidewall height works out to 38.8mm (1.53") and overall outside diameter is 585.5mm (23.05"). At highway speed the tire completes about 544 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 125/31R20 is unavailable, the closest same-diameter substitutes on the same rim are 115/34R20 and 135/29R20. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 125/31R20 you can upsize to 135/19R21 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 115/45R19 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 125/31R20 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 125/31R20

tire_size.no_vehicles_found