Section Width125 mm (4.9")
Aspect Ratio348%
Rim Diameter40"
Overall Diameter1886 mm (74.3")
Sidewall Height435 mm
Circumference5925 mm
125/348R40 — Buy Tires

Everything to know about the 125/348R40 tire size

Size geometry

A 125/348R40 tire has a 125mm section width and a 348% aspect ratio, mounted on a 40-inch rim. Sidewall height works out to 435.0mm (17.13") and overall outside diameter is 1886.0mm (74.25"). At highway speed the tire completes about 169 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 125/348R40 is unavailable, the closest same-diameter substitutes on the same rim are 115/378R40 and 135/322R40. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 125/348R40 you can upsize to 135/313R41 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 115/389R39 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 125/348R40 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 125/348R40

tire_size.no_vehicles_found