Section Width125 mm (4.9")
Aspect Ratio431%
Rim Diameter30"
Overall Diameter1840 mm (72.4")
Sidewall Height539 mm
Circumference5779 mm
125/431R30 — Buy Tires

Everything to know about the 125/431R30 tire size

Size geometry

A 125/431R30 tire has a 125mm section width and a 431% aspect ratio, mounted on a 30-inch rim. Sidewall height works out to 538.8mm (21.21") and overall outside diameter is 1839.5mm (72.42"). At highway speed the tire completes about 173 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 125/431R30 is unavailable, the closest same-diameter substitutes on the same rim are 115/468R30 and 135/399R30. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 125/431R30 you can upsize to 135/390R31 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 115/480R29 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 125/431R30 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 125/431R30

tire_size.no_vehicles_found