Section Width125 mm (4.9")
Aspect Ratio639%
Rim Diameter10"
Overall Diameter1852 mm (72.9")
Sidewall Height799 mm
Circumference5817 mm
125/639R10 — Buy Tires

Everything to know about the 125/639R10 tire size

Size geometry

A 125/639R10 tire has a 125mm section width and a 639% aspect ratio, mounted on a 10-inch rim. Sidewall height works out to 798.8mm (31.45") and overall outside diameter is 1851.5mm (72.89"). At highway speed the tire completes about 172 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 125/639R10 is unavailable, the closest same-diameter substitutes on the same rim are 115/695R10 and 135/592R10. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 125/639R10 you can upsize to 135/582R11 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 115/706R9 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 125/639R10 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 125/639R10

tire_size.no_vehicles_found