Section Width125 mm (4.9")
Aspect Ratio63%
Rim Diameter20"
Overall Diameter666 mm (26.2")
Sidewall Height79 mm
Circumference2091 mm
125/63R20 — Buy Tires

Everything to know about the 125/63R20 tire size

Size geometry

A 125/63R20 tire has a 125mm section width and a 63% aspect ratio, mounted on a 20-inch rim. Sidewall height works out to 78.8mm (3.10") and overall outside diameter is 665.5mm (26.20"). At highway speed the tire completes about 478 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 125/63R20 is unavailable, the closest same-diameter substitutes on the same rim are 115/68R20 and 135/58R20. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 125/63R20 you can upsize to 135/49R21 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 115/80R19 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 125/63R20 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 125/63R20

tire_size.no_vehicles_found