Section Width125 mm (4.9")
Aspect Ratio72%
Rim Diameter26"
Overall Diameter840 mm (33.1")
Sidewall Height90 mm
Circumference2640 mm
125/72R26 — Buy Tires

Everything to know about the 125/72R26 tire size

Size geometry

A 125/72R26 tire has a 125mm section width and a 72% aspect ratio, mounted on a 26-inch rim. Sidewall height works out to 90.0mm (3.54") and overall outside diameter is 840.4mm (33.09"). At highway speed the tire completes about 379 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 125/72R26 is unavailable, the closest same-diameter substitutes on the same rim are 115/78R26 and 135/67R26. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 125/72R26 you can upsize to 135/57R27 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 115/89R25 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 125/72R26 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 125/72R26

tire_size.no_vehicles_found