Section Width125 mm (4.9")
Aspect Ratio80%
Rim Diameter21"
Overall Diameter733 mm (28.9")
Sidewall Height100 mm
Circumference2304 mm
125/80R21 — Buy Tires

Everything to know about the 125/80R21 tire size

Size geometry

A 125/80R21 tire has a 125mm section width and a 80% aspect ratio, mounted on a 21-inch rim. Sidewall height works out to 100.0mm (3.94") and overall outside diameter is 733.4mm (28.87"). At highway speed the tire completes about 434 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 125/80R21 is unavailable, the closest same-diameter substitutes on the same rim are 115/87R21 and 135/74R21. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 125/80R21 you can upsize to 135/65R22 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 115/98R20 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 125/80R21 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 125/80R21

tire_size.no_vehicles_found