Section Width135 mm (5.3")
Aspect Ratio10%
Rim Diameter28"
Overall Diameter738 mm (29.1")
Sidewall Height14 mm
Circumference2319 mm
135/10R28 — Buy Tires

Everything to know about the 135/10R28 tire size

Size geometry

A 135/10R28 tire has a 135mm section width and a 10% aspect ratio, mounted on a 28-inch rim. Sidewall height works out to 13.5mm (0.53") and overall outside diameter is 738.2mm (29.06"). At highway speed the tire completes about 431 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 135/10R28 is unavailable, the closest same-diameter substitutes on the same rim are 125/11R28 and 145/9R28. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 135/10R28 you can upsize to 145/1R29 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 125/21R27 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 135/10R28 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 135/10R28

tire_size.no_vehicles_found