Section Width135 mm (5.3")
Aspect Ratio225%
Rim Diameter10"
Overall Diameter862 mm (33.9")
Sidewall Height304 mm
Circumference2706 mm
135/225R10 — Buy Tires

Everything to know about the 135/225R10 tire size

Size geometry

A 135/225R10 tire has a 135mm section width and a 225% aspect ratio, mounted on a 10-inch rim. Sidewall height works out to 303.8mm (11.96") and overall outside diameter is 861.5mm (33.92"). At highway speed the tire completes about 369 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 135/225R10 is unavailable, the closest same-diameter substitutes on the same rim are 125/243R10 and 145/209R10. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 135/225R10 you can upsize to 145/201R11 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 125/253R9 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 135/225R10 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 135/225R10

tire_size.no_vehicles_found