Section Width135 mm (5.3")
Aspect Ratio246%
Rim Diameter48"
Overall Diameter1883 mm (74.2")
Sidewall Height332 mm
Circumference5917 mm
135/246R48 — Buy Tires

Everything to know about the 135/246R48 tire size

Size geometry

A 135/246R48 tire has a 135mm section width and a 246% aspect ratio, mounted on a 48-inch rim. Sidewall height works out to 332.1mm (13.07") and overall outside diameter is 1883.4mm (74.15"). At highway speed the tire completes about 169 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 135/246R48 is unavailable, the closest same-diameter substitutes on the same rim are 125/266R48 and 145/229R48. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 135/246R48 you can upsize to 145/220R49 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 125/276R47 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 135/246R48 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 135/246R48

tire_size.no_vehicles_found