Section Width135 mm (5.3")
Aspect Ratio280%
Rim Diameter44"
Overall Diameter1874 mm (73.8")
Sidewall Height378 mm
Circumference5886 mm
135/280R44 — Buy Tires

Everything to know about the 135/280R44 tire size

Size geometry

A 135/280R44 tire has a 135mm section width and a 280% aspect ratio, mounted on a 44-inch rim. Sidewall height works out to 378.0mm (14.88") and overall outside diameter is 1873.6mm (73.76"). At highway speed the tire completes about 170 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 135/280R44 is unavailable, the closest same-diameter substitutes on the same rim are 125/302R44 and 145/261R44. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 135/280R44 you can upsize to 145/252R45 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 125/313R43 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 135/280R44 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 135/280R44

tire_size.no_vehicles_found