Section Width135 mm (5.3")
Aspect Ratio289%
Rim Diameter42"
Overall Diameter1847 mm (72.7")
Sidewall Height390 mm
Circumference5803 mm
135/289R42 — Buy Tires

Everything to know about the 135/289R42 tire size

Size geometry

A 135/289R42 tire has a 135mm section width and a 289% aspect ratio, mounted on a 42-inch rim. Sidewall height works out to 390.1mm (15.36") and overall outside diameter is 1847.1mm (72.72"). At highway speed the tire completes about 172 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 135/289R42 is unavailable, the closest same-diameter substitutes on the same rim are 125/312R42 and 145/269R42. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 135/289R42 you can upsize to 145/260R43 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 125/322R41 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 135/289R42 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 135/289R42

tire_size.no_vehicles_found