Section Width135 mm (5.3")
Aspect Ratio320%
Rim Diameter40"
Overall Diameter1880 mm (74.0")
Sidewall Height432 mm
Circumference5906 mm
135/320R40 — Buy Tires

Everything to know about the 135/320R40 tire size

Size geometry

A 135/320R40 tire has a 135mm section width and a 320% aspect ratio, mounted on a 40-inch rim. Sidewall height works out to 432.0mm (17.01") and overall outside diameter is 1880.0mm (74.02"). At highway speed the tire completes about 169 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 135/320R40 is unavailable, the closest same-diameter substitutes on the same rim are 125/346R40 and 145/298R40. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 135/320R40 you can upsize to 145/289R41 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 125/356R39 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 135/320R40 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 135/320R40

tire_size.no_vehicles_found