Section Width135 mm (5.3")
Aspect Ratio58%
Rim Diameter22"
Overall Diameter715 mm (28.2")
Sidewall Height78 mm
Circumference2248 mm
135/58R22 — Buy Tires

Everything to know about the 135/58R22 tire size

Size geometry

A 135/58R22 tire has a 135mm section width and a 58% aspect ratio, mounted on a 22-inch rim. Sidewall height works out to 78.3mm (3.08") and overall outside diameter is 715.4mm (28.17"). At highway speed the tire completes about 445 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 135/58R22 is unavailable, the closest same-diameter substitutes on the same rim are 125/63R22 and 145/54R22. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 135/58R22 you can upsize to 145/45R23 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 125/73R21 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 135/58R22 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 135/58R22

tire_size.no_vehicles_found