Section Width135 mm (5.3")
Aspect Ratio80%
Rim Diameter28"
Overall Diameter927 mm (36.5")
Sidewall Height108 mm
Circumference2913 mm
135/80R28 — Buy Tires

Everything to know about the 135/80R28 tire size

Size geometry

A 135/80R28 tire has a 135mm section width and a 80% aspect ratio, mounted on a 28-inch rim. Sidewall height works out to 108.0mm (4.25") and overall outside diameter is 927.2mm (36.50"). At highway speed the tire completes about 343 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 135/80R28 is unavailable, the closest same-diameter substitutes on the same rim are 125/86R28 and 145/74R28. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 135/80R28 you can upsize to 145/66R29 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 125/97R27 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 135/80R28 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 135/80R28

tire_size.no_vehicles_found