Section Width145 mm (5.7")
Aspect Ratio285%
Rim Diameter40"
Overall Diameter1843 mm (72.5")
Sidewall Height413 mm
Circumference5788 mm
145/285R40 — Buy Tires

Everything to know about the 145/285R40 tire size

Size geometry

A 145/285R40 tire has a 145mm section width and a 285% aspect ratio, mounted on a 40-inch rim. Sidewall height works out to 413.3mm (16.27") and overall outside diameter is 1842.5mm (72.54"). At highway speed the tire completes about 173 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 145/285R40 is unavailable, the closest same-diameter substitutes on the same rim are 135/306R40 and 155/267R40. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 145/285R40 you can upsize to 155/258R41 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 135/316R39 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 145/285R40 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 145/285R40

tire_size.no_vehicles_found