Section Width155 mm (6.1")
Aspect Ratio210%
Rim Diameter48"
Overall Diameter1870 mm (73.6")
Sidewall Height326 mm
Circumference5875 mm
155/210R48 — Buy Tires

Everything to know about the 155/210R48 tire size

Size geometry

A 155/210R48 tire has a 155mm section width and a 210% aspect ratio, mounted on a 48-inch rim. Sidewall height works out to 325.5mm (12.81") and overall outside diameter is 1870.2mm (73.63"). At highway speed the tire completes about 170 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 155/210R48 is unavailable, the closest same-diameter substitutes on the same rim are 145/224R48 and 165/197R48. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 155/210R48 you can upsize to 165/190R49 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 145/233R47 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 155/210R48 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 155/210R48

tire_size.no_vehicles_found