Section Width225 mm (8.9")
Aspect Ratio250%
Rim Diameter28"
Overall Diameter1836 mm (72.3")
Sidewall Height563 mm
Circumference5769 mm
225/250R28 — Buy Tires

Everything to know about the 225/250R28 tire size

Size geometry

A 225/250R28 tire has a 225mm section width and a 250% aspect ratio, mounted on a 28-inch rim. Sidewall height works out to 562.5mm (22.15") and overall outside diameter is 1836.2mm (72.29"). At highway speed the tire completes about 173 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 225/250R28 is unavailable, the closest same-diameter substitutes on the same rim are 215/262R28 and 235/239R28. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 225/250R28 you can upsize to 235/234R29 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 215/268R27 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 225/250R28 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 225/250R28

tire_size.no_vehicles_found