Section Width225 mm (8.9")
Aspect Ratio83%
Rim Diameter10"
Overall Diameter628 mm (24.7")
Sidewall Height187 mm
Circumference1971 mm
225/83R10 — Buy Tires

Everything to know about the 225/83R10 tire size

Size geometry

A 225/83R10 tire has a 225mm section width and a 83% aspect ratio, mounted on a 10-inch rim. Sidewall height works out to 186.8mm (7.35") and overall outside diameter is 627.5mm (24.70"). At highway speed the tire completes about 507 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 225/83R10 is unavailable, the closest same-diameter substitutes on the same rim are 215/87R10 and 235/79R10. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 225/83R10 you can upsize to 235/74R11 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 215/93R9 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 225/83R10 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 225/83R10

tire_size.no_vehicles_found