Section Width235 mm (9.3")
Aspect Ratio120%
Rim Diameter52"
Overall Diameter1885 mm (74.2")
Sidewall Height282 mm
Circumference5921 mm
235/120R52 — Buy Tires

Everything to know about the 235/120R52 tire size

Size geometry

A 235/120R52 tire has a 235mm section width and a 120% aspect ratio, mounted on a 52-inch rim. Sidewall height works out to 282.0mm (11.10") and overall outside diameter is 1884.8mm (74.20"). At highway speed the tire completes about 169 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 235/120R52 is unavailable, the closest same-diameter substitutes on the same rim are 225/125R52 and 245/115R52. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 235/120R52 you can upsize to 245/110R53 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 225/131R51 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 235/120R52 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 235/120R52

tire_size.no_vehicles_found