Section Width235 mm (9.3")
Aspect Ratio321%
Rim Diameter12"
Overall Diameter1814 mm (71.4")
Sidewall Height754 mm
Circumference5697 mm
235/321R12 — Buy Tires

Everything to know about the 235/321R12 tire size

Size geometry

A 235/321R12 tire has a 235mm section width and a 321% aspect ratio, mounted on a 12-inch rim. Sidewall height works out to 754.4mm (29.70") and overall outside diameter is 1813.5mm (71.40"). At highway speed the tire completes about 176 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 235/321R12 is unavailable, the closest same-diameter substitutes on the same rim are 225/335R12 and 245/308R12. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 235/321R12 you can upsize to 245/303R13 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 225/341R11 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 235/321R12 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 235/321R12

tire_size.no_vehicles_found