Section Width235 mm (9.3")
Aspect Ratio52%
Rim Diameter20"
Overall Diameter752 mm (29.6")
Sidewall Height122 mm
Circumference2364 mm
235/52R20 — Buy Tires

Everything to know about the 235/52R20 tire size

Size geometry

A 235/52R20 tire has a 235mm section width and a 52% aspect ratio, mounted on a 20-inch rim. Sidewall height works out to 122.2mm (4.81") and overall outside diameter is 752.4mm (29.62"). At highway speed the tire completes about 423 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 235/52R20 is unavailable, the closest same-diameter substitutes on the same rim are 225/54R20 and 245/50R20. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 235/52R20 you can upsize to 245/45R21 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 225/60R19 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 235/52R20 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 235/52R20

tire_size.no_vehicles_found