Section Width245 mm (9.7")
Aspect Ratio20%
Rim Diameter32"
Overall Diameter911 mm (35.9")
Sidewall Height49 mm
Circumference2861 mm
245/20R32 — Buy Tires

Everything to know about the 245/20R32 tire size

Size geometry

A 245/20R32 tire has a 245mm section width and a 20% aspect ratio, mounted on a 32-inch rim. Sidewall height works out to 49.0mm (1.93") and overall outside diameter is 910.8mm (35.86"). At highway speed the tire completes about 349 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 245/20R32 is unavailable, the closest same-diameter substitutes on the same rim are 235/21R32 and 255/19R32. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 245/20R32 you can upsize to 255/14R33 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 235/26R31 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 245/20R32 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 245/20R32

tire_size.no_vehicles_found