Section Width255 mm (10.0")
Aspect Ratio102%
Rim Diameter11"
Overall Diameter800 mm (31.5")
Sidewall Height260 mm
Circumference2512 mm
255/102R11 — Buy Tires

Everything to know about the 255/102R11 tire size

Size geometry

A 255/102R11 tire has a 255mm section width and a 102% aspect ratio, mounted on a 11-inch rim. Sidewall height works out to 260.1mm (10.24") and overall outside diameter is 799.6mm (31.48"). At highway speed the tire completes about 398 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 255/102R11 is unavailable, the closest same-diameter substitutes on the same rim are 245/106R11 and 265/98R11. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 255/102R11 you can upsize to 265/93R12 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 245/111R10 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 255/102R11 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 255/102R11

tire_size.no_vehicles_found