Section Width255 mm (10.0")
Aspect Ratio10%
Rim Diameter19"
Overall Diameter534 mm (21.0")
Sidewall Height26 mm
Circumference1676 mm
255/10R19 — Buy Tires

Everything to know about the 255/10R19 tire size

Size geometry

A 255/10R19 tire has a 255mm section width and a 10% aspect ratio, mounted on a 19-inch rim. Sidewall height works out to 25.5mm (1.00") and overall outside diameter is 533.6mm (21.01"). At highway speed the tire completes about 597 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 255/10R19 is unavailable, the closest same-diameter substitutes on the same rim are 245/10R19 and 265/10R19. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 255/10R19 you can upsize to 265/5R20 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 245/16R18 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 255/10R19 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 255/10R19

tire_size.no_vehicles_found