Section Width255 mm (10.0")
Aspect Ratio295%
Rim Diameter10"
Overall Diameter1759 mm (69.2")
Sidewall Height752 mm
Circumference5524 mm
255/295R10 — Buy Tires

Everything to know about the 255/295R10 tire size

Size geometry

A 255/295R10 tire has a 255mm section width and a 295% aspect ratio, mounted on a 10-inch rim. Sidewall height works out to 752.3mm (29.62") and overall outside diameter is 1758.5mm (69.23"). At highway speed the tire completes about 181 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 255/295R10 is unavailable, the closest same-diameter substitutes on the same rim are 245/307R10 and 265/284R10. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 255/295R10 you can upsize to 265/279R11 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 245/312R9 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 255/295R10 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 255/295R10

tire_size.no_vehicles_found