Section Width255 mm (10.0")
Aspect Ratio44%
Rim Diameter20"
Overall Diameter732 mm (28.8")
Sidewall Height112 mm
Circumference2301 mm
255/44R20 — Buy Tires

Everything to know about the 255/44R20 tire size

Size geometry

A 255/44R20 tire has a 255mm section width and a 44% aspect ratio, mounted on a 20-inch rim. Sidewall height works out to 112.2mm (4.42") and overall outside diameter is 732.4mm (28.83"). At highway speed the tire completes about 435 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 255/44R20 is unavailable, the closest same-diameter substitutes on the same rim are 245/46R20 and 265/42R20. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 255/44R20 you can upsize to 265/38R21 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 245/51R19 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 255/44R20 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 255/44R20

tire_size.no_vehicles_found