Section Width265 mm (10.4")
Aspect Ratio128%
Rim Diameter48"
Overall Diameter1898 mm (74.7")
Sidewall Height339 mm
Circumference5961 mm
265/128R48 — Buy Tires

Everything to know about the 265/128R48 tire size

Size geometry

A 265/128R48 tire has a 265mm section width and a 128% aspect ratio, mounted on a 48-inch rim. Sidewall height works out to 339.2mm (13.35") and overall outside diameter is 1897.6mm (74.71"). At highway speed the tire completes about 168 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 265/128R48 is unavailable, the closest same-diameter substitutes on the same rim are 255/133R48 and 275/123R48. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 265/128R48 you can upsize to 275/119R49 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 255/138R47 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 265/128R48 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 265/128R48

tire_size.no_vehicles_found