Section Width265 mm (10.4")
Aspect Ratio92%
Rim Diameter10"
Overall Diameter742 mm (29.2")
Sidewall Height244 mm
Circumference2330 mm
265/92R10 — Buy Tires

Everything to know about the 265/92R10 tire size

Size geometry

A 265/92R10 tire has a 265mm section width and a 92% aspect ratio, mounted on a 10-inch rim. Sidewall height works out to 243.8mm (9.60") and overall outside diameter is 741.6mm (29.20"). At highway speed the tire completes about 429 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 265/92R10 is unavailable, the closest same-diameter substitutes on the same rim are 255/96R10 and 275/89R10. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 265/92R10 you can upsize to 275/84R11 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 255/101R9 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 265/92R10 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 265/92R10

tire_size.no_vehicles_found