Section Width275 mm (10.8")
Aspect Ratio128%
Rim Diameter10"
Overall Diameter958 mm (37.7")
Sidewall Height352 mm
Circumference3010 mm
275/128R10 — Buy Tires

Everything to know about the 275/128R10 tire size

Size geometry

A 275/128R10 tire has a 275mm section width and a 128% aspect ratio, mounted on a 10-inch rim. Sidewall height works out to 352.0mm (13.86") and overall outside diameter is 958.0mm (37.72"). At highway speed the tire completes about 332 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 275/128R10 is unavailable, the closest same-diameter substitutes on the same rim are 265/133R10 and 285/124R10. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 275/128R10 you can upsize to 285/119R11 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 265/138R9 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 275/128R10 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 275/128R10

tire_size.no_vehicles_found