Section Width275 mm (10.8")
Aspect Ratio42%
Rim Diameter10"
Overall Diameter485 mm (19.1")
Sidewall Height116 mm
Circumference1524 mm
275/42R10 — Buy Tires

Everything to know about the 275/42R10 tire size

Size geometry

A 275/42R10 tire has a 275mm section width and a 42% aspect ratio, mounted on a 10-inch rim. Sidewall height works out to 115.5mm (4.55") and overall outside diameter is 485.0mm (19.09"). At highway speed the tire completes about 656 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 275/42R10 is unavailable, the closest same-diameter substitutes on the same rim are 265/44R10 and 285/41R10. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 275/42R10 you can upsize to 285/36R11 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 265/48R9 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 275/42R10 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 275/42R10

tire_size.no_vehicles_found