Section Width285 mm (11.2")
Aspect Ratio10%
Rim Diameter33"
Overall Diameter895 mm (35.2")
Sidewall Height29 mm
Circumference2812 mm
285/10R33 — Buy Tires

Everything to know about the 285/10R33 tire size

Size geometry

A 285/10R33 tire has a 285mm section width and a 10% aspect ratio, mounted on a 33-inch rim. Sidewall height works out to 28.5mm (1.12") and overall outside diameter is 895.2mm (35.24"). At highway speed the tire completes about 356 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 285/10R33 is unavailable, the closest same-diameter substitutes on the same rim are 275/10R33 and 295/10R33. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 285/10R33 you can upsize to 295/5R34 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 275/15R32 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 285/10R33 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 285/10R33

tire_size.no_vehicles_found