Section Width285 mm (11.2")
Aspect Ratio11%
Rim Diameter24"
Overall Diameter672 mm (26.5")
Sidewall Height31 mm
Circumference2112 mm
285/11R24 — Buy Tires

Everything to know about the 285/11R24 tire size

Size geometry

A 285/11R24 tire has a 285mm section width and a 11% aspect ratio, mounted on a 24-inch rim. Sidewall height works out to 31.4mm (1.23") and overall outside diameter is 672.3mm (26.47"). At highway speed the tire completes about 473 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 285/11R24 is unavailable, the closest same-diameter substitutes on the same rim are 275/11R24 and 295/11R24. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 285/11R24 you can upsize to 295/6R25 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 275/16R23 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 285/11R24 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 285/11R24

tire_size.no_vehicles_found