Section Width285 mm (11.2")
Aspect Ratio19%
Rim Diameter26"
Overall Diameter769 mm (30.3")
Sidewall Height54 mm
Circumference2415 mm
285/19R26 — Buy Tires

Everything to know about the 285/19R26 tire size

Size geometry

A 285/19R26 tire has a 285mm section width and a 19% aspect ratio, mounted on a 26-inch rim. Sidewall height works out to 54.1mm (2.13") and overall outside diameter is 768.7mm (30.26"). At highway speed the tire completes about 414 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 285/19R26 is unavailable, the closest same-diameter substitutes on the same rim are 275/20R26 and 295/18R26. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 285/19R26 you can upsize to 295/14R27 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 275/24R25 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 285/19R26 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 285/19R26

tire_size.no_vehicles_found