Section Width285 mm (11.2")
Aspect Ratio21%
Rim Diameter35"
Overall Diameter1009 mm (39.7")
Sidewall Height60 mm
Circumference3169 mm
285/21R35 — Buy Tires

Everything to know about the 285/21R35 tire size

Size geometry

A 285/21R35 tire has a 285mm section width and a 21% aspect ratio, mounted on a 35-inch rim. Sidewall height works out to 59.9mm (2.36") and overall outside diameter is 1008.7mm (39.71"). At highway speed the tire completes about 316 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 285/21R35 is unavailable, the closest same-diameter substitutes on the same rim are 275/22R35 and 295/20R35. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 285/21R35 you can upsize to 295/16R36 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 275/26R34 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 285/21R35 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 285/21R35

tire_size.no_vehicles_found