Section Width285 mm (11.2")
Aspect Ratio220%
Rim Diameter24"
Overall Diameter1864 mm (73.4")
Sidewall Height627 mm
Circumference5855 mm
285/220R24 — Buy Tires

Everything to know about the 285/220R24 tire size

Size geometry

A 285/220R24 tire has a 285mm section width and a 220% aspect ratio, mounted on a 24-inch rim. Sidewall height works out to 627.0mm (24.69") and overall outside diameter is 1863.6mm (73.37"). At highway speed the tire completes about 171 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 285/220R24 is unavailable, the closest same-diameter substitutes on the same rim are 275/228R24 and 295/213R24. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 285/220R24 you can upsize to 295/208R25 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 275/233R23 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 285/220R24 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 285/220R24

tire_size.no_vehicles_found