Section Width285 mm (11.2")
Aspect Ratio38%
Rim Diameter16"
Overall Diameter623 mm (24.5")
Sidewall Height108 mm
Circumference1957 mm
285/38R16 — Buy Tires

Everything to know about the 285/38R16 tire size

Size geometry

A 285/38R16 tire has a 285mm section width and a 38% aspect ratio, mounted on a 16-inch rim. Sidewall height works out to 108.3mm (4.26") and overall outside diameter is 623.0mm (24.53"). At highway speed the tire completes about 511 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 285/38R16 is unavailable, the closest same-diameter substitutes on the same rim are 275/39R16 and 295/37R16. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 285/38R16 you can upsize to 295/32R17 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 275/44R15 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 285/38R16 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 285/38R16

tire_size.no_vehicles_found