Section Width285 mm (11.2")
Aspect Ratio43%
Rim Diameter11"
Overall Diameter525 mm (20.6")
Sidewall Height123 mm
Circumference1648 mm
285/43R11 — Buy Tires

Everything to know about the 285/43R11 tire size

Size geometry

A 285/43R11 tire has a 285mm section width and a 43% aspect ratio, mounted on a 11-inch rim. Sidewall height works out to 122.5mm (4.82") and overall outside diameter is 524.5mm (20.65"). At highway speed the tire completes about 607 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 285/43R11 is unavailable, the closest same-diameter substitutes on the same rim are 275/45R11 and 295/42R11. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 285/43R11 you can upsize to 295/37R12 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 275/49R10 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 285/43R11 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 285/43R11

tire_size.no_vehicles_found