Section Width285 mm (11.2")
Aspect Ratio56%
Rim Diameter62"
Overall Diameter1894 mm (74.6")
Sidewall Height160 mm
Circumference5950 mm
285/56R62 — Buy Tires

Everything to know about the 285/56R62 tire size

Size geometry

A 285/56R62 tire has a 285mm section width and a 56% aspect ratio, mounted on a 62-inch rim. Sidewall height works out to 159.6mm (6.28") and overall outside diameter is 1894.0mm (74.57"). At highway speed the tire completes about 168 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 285/56R62 is unavailable, the closest same-diameter substitutes on the same rim are 275/58R62 and 295/54R62. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 285/56R62 you can upsize to 295/50R63 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 275/63R61 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 285/56R62 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 285/56R62

tire_size.no_vehicles_found