Section Width285 mm (11.2")
Aspect Ratio65%
Rim Diameter11"
Overall Diameter650 mm (25.6")
Sidewall Height185 mm
Circumference2042 mm
285/65R11 — Buy Tires

Everything to know about the 285/65R11 tire size

Size geometry

A 285/65R11 tire has a 285mm section width and a 65% aspect ratio, mounted on a 11-inch rim. Sidewall height works out to 185.3mm (7.29") and overall outside diameter is 649.9mm (25.59"). At highway speed the tire completes about 490 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 285/65R11 is unavailable, the closest same-diameter substitutes on the same rim are 275/67R11 and 295/63R11. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 285/65R11 you can upsize to 295/58R12 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 275/72R10 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 285/65R11 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 285/65R11

tire_size.no_vehicles_found