Section Width285 mm (11.2")
Aspect Ratio66%
Rim Diameter20"
Overall Diameter884 mm (34.8")
Sidewall Height188 mm
Circumference2778 mm
285/66R20 — Buy Tires

Everything to know about the 285/66R20 tire size

Size geometry

A 285/66R20 tire has a 285mm section width and a 66% aspect ratio, mounted on a 20-inch rim. Sidewall height works out to 188.1mm (7.41") and overall outside diameter is 884.2mm (34.81"). At highway speed the tire completes about 360 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 285/66R20 is unavailable, the closest same-diameter substitutes on the same rim are 275/68R20 and 295/64R20. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 285/66R20 you can upsize to 295/59R21 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 275/73R19 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 285/66R20 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 285/66R20

tire_size.no_vehicles_found