Section Width295 mm (11.6")
Aspect Ratio121%
Rim Diameter10"
Overall Diameter968 mm (38.1")
Sidewall Height357 mm
Circumference3041 mm
295/121R10 — Buy Tires

Everything to know about the 295/121R10 tire size

Size geometry

A 295/121R10 tire has a 295mm section width and a 121% aspect ratio, mounted on a 10-inch rim. Sidewall height works out to 356.9mm (14.05") and overall outside diameter is 967.9mm (38.11"). At highway speed the tire completes about 329 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 295/121R10 is unavailable, the closest same-diameter substitutes on the same rim are 285/125R10 and 305/117R10. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 295/121R10 you can upsize to 305/113R11 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 285/130R9 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 295/121R10 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 295/121R10

tire_size.no_vehicles_found