Section Width295 mm (11.6")
Aspect Ratio20%
Rim Diameter28"
Overall Diameter829 mm (32.6")
Sidewall Height59 mm
Circumference2605 mm
295/20R28 — Buy Tires

Everything to know about the 295/20R28 tire size

Size geometry

A 295/20R28 tire has a 295mm section width and a 20% aspect ratio, mounted on a 28-inch rim. Sidewall height works out to 59.0mm (2.32") and overall outside diameter is 829.2mm (32.65"). At highway speed the tire completes about 384 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 295/20R28 is unavailable, the closest same-diameter substitutes on the same rim are 285/21R28 and 305/19R28. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 295/20R28 you can upsize to 305/15R29 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 285/25R27 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 295/20R28 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 295/20R28

tire_size.no_vehicles_found