Section Width295 mm (11.6")
Aspect Ratio28%
Rim Diameter27"
Overall Diameter851 mm (33.5")
Sidewall Height83 mm
Circumference2674 mm
295/28R27 — Buy Tires

Everything to know about the 295/28R27 tire size

Size geometry

A 295/28R27 tire has a 295mm section width and a 28% aspect ratio, mounted on a 27-inch rim. Sidewall height works out to 82.6mm (3.25") and overall outside diameter is 851.0mm (33.50"). At highway speed the tire completes about 374 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 295/28R27 is unavailable, the closest same-diameter substitutes on the same rim are 285/29R27 and 305/27R27. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 295/28R27 you can upsize to 305/23R28 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 285/33R26 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 295/28R27 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 295/28R27

tire_size.no_vehicles_found