Section Width295 mm (11.6")
Aspect Ratio36%
Rim Diameter30"
Overall Diameter974 mm (38.4")
Sidewall Height106 mm
Circumference3061 mm
295/36R30 — Buy Tires

Everything to know about the 295/36R30 tire size

Size geometry

A 295/36R30 tire has a 295mm section width and a 36% aspect ratio, mounted on a 30-inch rim. Sidewall height works out to 106.2mm (4.18") and overall outside diameter is 974.4mm (38.36"). At highway speed the tire completes about 327 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 295/36R30 is unavailable, the closest same-diameter substitutes on the same rim are 285/37R30 and 305/35R30. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 295/36R30 you can upsize to 305/31R31 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 285/42R29 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 295/36R30 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 295/36R30

tire_size.no_vehicles_found