Section Width295 mm (11.6")
Aspect Ratio38%
Rim Diameter16"
Overall Diameter631 mm (24.8")
Sidewall Height112 mm
Circumference1981 mm
295/38R16 — Buy Tires

Everything to know about the 295/38R16 tire size

Size geometry

A 295/38R16 tire has a 295mm section width and a 38% aspect ratio, mounted on a 16-inch rim. Sidewall height works out to 112.1mm (4.41") and overall outside diameter is 630.6mm (24.83"). At highway speed the tire completes about 505 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 295/38R16 is unavailable, the closest same-diameter substitutes on the same rim are 285/39R16 and 305/37R16. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 295/38R16 you can upsize to 305/33R17 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 285/44R15 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 295/38R16 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 295/38R16

tire_size.no_vehicles_found