Section Width295 mm (11.6")
Aspect Ratio43%
Rim Diameter20"
Overall Diameter762 mm (30.0")
Sidewall Height127 mm
Circumference2393 mm
295/43R20 — Buy Tires

Everything to know about the 295/43R20 tire size

Size geometry

A 295/43R20 tire has a 295mm section width and a 43% aspect ratio, mounted on a 20-inch rim. Sidewall height works out to 126.8mm (4.99") and overall outside diameter is 761.7mm (29.99"). At highway speed the tire completes about 418 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 295/43R20 is unavailable, the closest same-diameter substitutes on the same rim are 285/45R20 and 305/42R20. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 295/43R20 you can upsize to 305/37R21 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 285/49R19 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 295/43R20 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 295/43R20

tire_size.no_vehicles_found